Smart Lights Control harness SM002A

 

 

Features:

SercoMoto SM002A upgrade replacement for the standard wiring harness & switch

 

CNC-machined aluminium switch housing

Connect straight to battery

Plug & play connectors for safety and ease of installation

Big power range support Max 75w each light.

 

 

 

Harness Functions:

The harness support 6 Operating mode, we make these 6 Operating modes to three sections

 

Section A: High Power beam,DRL(LOW power beam)

Section B: alternating strobe, two lights alternating on/off ,synchronized strobe

Section C: Pass flash

 

In Each section just only click switch to get function change. ( except Section C)

Double-click the switch easy to swap A.B section.

 

Section A:

When lights on, it default work with Section A high beam, we can click the switch from High beam to DRL(low beam) or from DRL to high beam. if we like use Section B functions we can double-click the switch to active Section B.

Section B:

Under section B we can via click switch to get 3 functions cycle change. if we like use Section B functions we can double-click the switch to active Section A.

Section C:

When lights did not turn on ,we can keep tap the switch make lights on in short time.

 

Install:

The switch install:

support 22-25mm diameter bar, or 7mm hole size fix, please refer follow picture.

 

Harness install

Red wire with fuse connect with battery positive part

Blue wire connect to negative part

Yellow wire is connect it to ACC wire or switch positive or the wire only bike's key on has power.