How to use

Turn Signal Button:

Switch on/ off Function

Press and hold the turn signal switch for 3 seconds to toggle the main light on or off.

Press the turn signal switch three times in quick succession to toggle the other set auxiliary light on or off.

Scroll wheel Button:

Dimming Function

Main Light Dimming: Press the right knob for 3 seconds until the main light flashes as a prompt.

Then, turn the knob forward to increase the main light brightness, or backward to decrease the brightness.

If the knob is not turned within 10 seconds, the setting will time out and exit.

The other set of auxiliary Light Dimming: Press the left knob for 3 seconds until the auxiliary light flashes as a prompt.Then, turn the knob forward to increase the auxiliary light brightness, or backward to decrease the brightness.If the knob is not turned within 10 seconds, the setting will time out and exit.

Horn Button:

Warning Function: Press and hold the horn to activate the flash function.

Overtake Button:

1. High Beam Synchronization Function

When the turn signal is activated, the lights will either flash in sync with the turn signal or turn off the lights on the same side. These two modes can be switched by pressing the hazard button 5 times in quick succession. A flash signal indicates successful mode switch.

2.Overtake Flash Mode

Press the overtake light switch (high beam) 5 times in quick succession to activate the flash mode.

Press it 5 more times to choose between different flash modes as follows:

Left and right simultaneous flash mode

Left and right alternating slow flash mode

Press the high beam switch twice in quick succession to deactivate the overtake flash mode.

3.High Beam Function